3 layers oak laminated solid timber flooring:
The top, or ‘wear’ layer is 2-4mm thick and can be sanded up to 4
times. Yorking Hardwood uses only sawn lamellas for top layer
because sawn hardwood veneers have no internal checks that might
cause face splits in lamella later on. Sawn hardwood lamellas are
100% solid wood and preserve the rich grain texture appearance.
Middle layer is made of cross-laid interconnected solid birch bars.
Thickness of the middle layer is 8-10 mm. Cork compensators are in
order to and help to balance internal stress, increase dimensional
stability of the plank and eliminate squeaking in floors. Bottom
layer is 2 mm solid birch lamella.
Feature of 3 layer oak flooring from Yorking:
High-adhesion polyurethane glues are used to bond top hardwood
veneer to plywood base. Extra strong bonding ensures that no
delamination occurs even under elevated moisture conditions.
Yorking Hardwood polyurethane adhesives are 100% formaldehyde free
and are environmentally friendly.
Structure of 3 layer oak timber floor:
Compare with solid wood flooring multi-layer flooring:
1. Due to the camera settings,all products photos from Yorking
Hardwood shall not be garanteed 100% same to our real wood floor.
2. Natural wood color variations shall not be considered as quality
problem and a short piece of wood plank can never be a full
representation of our wood flooring overviews.Samples are needed to
make sure you are purchasing the wood flooring with correct color